How to Pair Phonak Hearing Aids to an Android Cellphone – Soundwave Hearing Care

For this video, I’m going to show you how to connect your Phonak hearing aids to an Android cellphone and to the My Phonak app.

 

So, the first thing you need to do is go to your settings, connections and Bluetooth®. Now, to put your hearing aids into pairing mode, if you have a standard battery, you’re going to open and close the battery doors. And, if you have a rechargeable hearing aid, you will put your hearing aids on the charger until you see a flashing light, and then remove the hearing aids from the charger. Now you may have to hit scan again just to detect the devices, as I did there.

 

Now you will see that the right Phonak hearing aid has popped up. I will click right Phonak hearing aid and we should get a pairing request. You will hit “Pair”. Now, if you scroll up, you can see that the right Phonak hearing aid is connected for calls and audio.

Calgary and Alberta Hearing Aids

​

At Soundwave Hearing Care, we offer hearing aids and other management techniques so that you can hear the world around you more clearly. To make an appointment with an audiologist, get in touch with Soundwave Hearing Care right away.

 

Transcript

​

For this video, I’m going to show you how to connect your Phonak hearing aids to an Android cellphone and to the My Phonak app.

 

So, the first thing you need to do is go to your Settings → Connections → Bluetooth.

 

For standard‑battery models, open and close the battery doors. For rechargeable models, place the hearing aids on the charger until the light flashes, then remove them to initiate pairing mode.

 

Tap “Scan”, select the right Phonak hearing aid when it appears, and hit “Pair”. You’ll see it listed as connected for calls and audio.

 

Next, open the MyPhonak app. Follow the on-screen instructions; either opening/closing battery doors or placing on the charger. Select each hearing aid as it appears. Confirm pairing for both sides.

 

You’ll know pairing is complete when you see three entries under Bluetooth: one for calls/audio and two “LE_…” listings for right and left. That means everything is connected and working.